|
|
|
Lawrenceville, Georgia
|
|
Home
|
Custom Work
|
Ordering
|
Contact / About
|
|
404-375-5238
|
Contemporary Stainless
Steel Metal Wall Art Sculpture 31L
Contact me: RICHARD@GEORGIAMETALART.COM
404-375-5238
Lawrenceville, Georgia
|
|
This
is an original hand formed metal wall sculpture that was
designed and built by me, Richard Walker. I put an enormous
amount of time and effort into these pieces to make sure that they
are the finest sculptures that are available anywhere. Each
piece is completely hand cut and precision welded. As you can
see, they are three dimensional. These sculptures stand off of
the wall and are designed to allow light to pass through them.
Another thing you will notice is the finish. Only the highest
quality paints are used. All the colors are custom mixed and
can not be found anywhere else. Hours are spent painstakingly
hand polishing these pieces to a mirror finish. The depth and
clarity of these finishes are unbelievable. When you take a
close look at these pieces you can see how all the time, effort, and
high quality materials make these pieces stand apart from all the
rest.
Feel
free to let me know if you have any questions.
Thanks!
Richard
|
|
Dimensions |
Prices and
sizes listed below |
| Stainless
Steel Construction |
100% Stainless Steel, Precisely
Hand Cut and Expertly Welded. Extremely sturdy construction. |
| Sculpture
Colors |
Gloss black oak design and hand textured stainless steel. |
| Paint
Details |
Mirror Finish
-- The paint is painstakingly polished to a Mirror Finish -- The
gloss is so deep that these pieces look Wet
Metallic --
The paint contains tiny metal particles. The colors lighten and
darken depending on how much light is hitting them.
Colors are Custom
Mixed -- they are not available anywhere else |
| Wall
Mounting -- Indoors |
This sculpture comes ready to hang.
Sculptures are designed to be mounted Indoors. Mounting
hardware is included! All you need is a Hammer to hang these
on your wall! |
| Original
Design |
These sculptures are designed, built, and
painted by me, Richard
Walker. All pieces are signed and dated. |
| Options |
This
piece can be custom built in larger sizes. Many more colors
are also available. Please see my Color
Selection Page. --Additional charges apply-- |
| Purchase |
| 20"
x 20" |
16"
x 16" |
| $340
+ 22s/h |
$295
+ 18s/h |
| 30"
x 30" |
24"
x 24" |
| $765
+ 45s/h |
$485
+ 35s/h |
This piece stands away
from the wall 1.75 inches
|
|
|
|
|
Galleries: Large
Pieces, Metallic
Blue Designs, Metallic
Red Designs, Mountain
Landscapes, Silver Designs, Gloss
Black Designs, Lighted Designs,
Textured Finish Pieces,
Freeform Designs, Table
Top Pieces, Round Bar Designs,
Drawing Gallery, Mosaic
Gallery
|
New
-- Master Sculpture Directory -- Links to all Galleries on this
Website
I have done this design in a couple ways, see the links below for more photos:
31L custom, 6k,
8k, 31L
More colors are also available, metallic red, gloss black, pearl white, etc.
This sculpture is built entirely out of
stainless steel. The polished bars you see between each of the 4 panels
actually run the entire length and width of the piece on the back side. I
make these pieces as rigid as possible, especially in larger sizes.
There are more than 30 welds that hold this piece together.
The wavy textured stainless steel finish
was done by hand and then the oak
tree design was painted. I then sprayed multiple layers of automotive grade clear
coat over the entire piece. After the paint cured it literally took days
to hand polish the finish in a 5 stage process. The finish is amazing
and you can see the clarity of the finish in the photos with the reflection
from the floor lamp.
Please see the links above for more
variations and more photos of this design. Sizes ranging from 16x16 up
to 30x30 are available. This sculpture stands away from the wall 1.75
inches. Prices are listed above. Please contact me for custom
orders or variations of this design.
Sculpture 31L
