Flowery Branch, Georgia    

Home Custom Work Ordering  Contact / About

404-375-5238

Contemporary Metal Wall Art Sculpture 3L


Contact Us:  RICHARD@GEORGIAMETALART.COM  
404-375-5238
Flowery Branch, Georgia

This is an original hand formed metal wall sculpture that was designed and built by me, Richard Walker.  I put an enormous amount of time and effort into these pieces to make sure that they are the finest sculptures that are available anywhere.  Each piece is completely hand cut and precision welded.  As you can see, they are three dimensional.  These sculptures stand off of the wall and are designed to allow light to pass through them.  Another thing you will notice is the finish.  Only the highest quality paints are used.  All the colors are custom mixed and can not be found anywhere else.  Hours are spent painstakingly hand polishing these pieces to a mirror finish.  The depth and clarity of these finishes are unbelievable.  When you take a close look at these pieces you can see how all the time, effort, and high quality materials make these pieces stand apart from all the rest.  

Feel free to let me know if you have any questions.

Thanks!

Richard

 Dimensions

32 inches Wide by 16 inches Tall by 1.75 inches deep

Stainless Steel Construction

100% Stainless Steel,  Precisely Hand Cut and Expertly Welded.  Extremely sturdy construction.

Sculpture Colors This sculpture has an amazing Gloss Metallic Blue finish and polished  with hand textured stainless steel sections and polished stainless steel round bar
 Paint Details

Mirror Finish -- The paint is painstakingly polished to a Mirror Finish -- The gloss is so deep that these pieces look Wet

Metallic -- The paint contains tiny metal particles. The colors lighten and darken depending on how much light is hitting them.

Colors are Custom Mixed -- they are not available anywhere else

Wall Mounting -- Indoors

This sculpture comes ready to hang.  Sculptures are designed to be mounted Indoors.  Mounting hardware is included!  All you need is a Hammer to hang these on your wall!

Original Design

These sculptures are designed, built, and painted by me, Richard Walker.  All pieces are signed and dated.  

Authenticity A certificate of authenticity will be included with this sculpture. 
Options This piece can be custom built in larger sizes.  Many more colors   are also   available.  Please see my Color Selection Page.  --Additional charges apply--
Purchase

 

$490 + $24s/h  

 

 

Galleries:  Large Pieces, Metallic Blue Designs, Metallic Red Designs, Mountain Landscapes, Silver Designs, Gloss Black Designs, Lighted Designs, Textured Finish Pieces, Freeform Designs, Table Top Pieces, Round Bar Designs, Drawing Gallery, Mosaic Gallery

This particular piece of metal wall art is actually 2 pieces.  Each piece measures 16in by 16in.  I built the framework out of 3/16in diameter stainless steel round bar.  I like my metal sculptures to be as sturdy as possible.  Unlike many of my pieces the framework is exposed on this piece.  Each piece has been welded together and each visible weld has been meticulously ground to create a seamless joint. 

After the framework is constructed I shear the stainless sheet that makes up the blue sections of this sculpture.  Each hole is cut by hand and the silver hand textured pieces are actually taken from the blue panels.  After the stainless sheet is welded to the frame the welds are ground smooth once again and the roundbar is polished.  There are 7 coats of automotive grade paint on this piece.  The framework and textured circles are clearcoated to give them depth.  After the paint is cured this piece is then hand polished in a 4 stage process. 

This is a really great looking piece of metal wall art as is but it can also be changed is various ways.  I can build each individual piece up to 24in x 24in and the wall mounts can be added to more than one side so the sculpture can be place on a wall in various configurations.  Colors can also be changed and more holes and circles can be added. 

 

Georgia Metal Wall Art