Contemporary Metal Wall Art Sculpture 54L, Amber Lime Green, Atlanta Georgia

Lawrenceville, Georgia

404-375-5238

Contemporary Metal Wall Art Sculpture 54L

Contact Me: RICHARD@GEORGIAMETALART.COM
404-375-5238
Lawrenceville, Georgia

This is an original hand formed metal wall sculpture that was designed and built by me, Richard Walker. I put an enormous amount of time and effort into these pieces to make sure that they are the finest sculptures that are available anywhere. Each piece is completely hand cut and precision welded. As you can see, they are three dimensional. These sculptures stand off of the wall and are designed to allow light to pass through them. Another thing you will notice is the finish. Only the highest quality paints are used. All the colors are custom mixed and can not be found anywhere else. Hours are spent painstakingly hand polishing these pieces to a mirror finish. The depth and clarity of these finishes are unbelievable. When you take a close look at these pieces you can see how all the time, effort, and high quality materials make these pieces stand apart from all the rest.

Feel free to let me know if you have any questions.

Thanks!

Richard

Dimensions

34 inches Wide by 34 inches Tall by 1.75 inches deep

Stainless Steel Construction

100% Stainless Steel, Precisely Hand Cut and Expertly Welded. Extremely sturdy construction.

Sculpture Colors

This sculpture has an amazing Gloss Metallic amber and lime green finish with polished stainless steel round bar

Paint Details

Mirror Finish -- The paint is painstakingly polished to a near mirror finish. The gloss is so deep that these pieces look Wet

Metallic -- The paint contains tiny metal particles. The colors lighten and darken depending on how much light is hitting them.

Colors are Custom Mixed -- they are not available anywhere else

Wall Mounting -- Indoors

This sculpture comes ready to hang. Sculptures are designed to be mounted Indoors. Mounting hardware is included! All you need is a Hammer to hang these on your wall!

Original Design

These sculptures are designed, built, and painted by me, Richard Walker. All pieces are signed and dated.

Options

This piece can be custom built in larger sizes. Many more colors are also available. Please see my Color Selection Page. --Additional charges apply--

Purchase

33" x 33" x 1.75"	40" x 40" x 1.75"	48" x 48" x 1.75"
$980 + 48s/h	$1590 + 80s/h	$2200 + 100s/h

Please contact for larger pieces.

Galleries: Large Pieces, Metallic Blue Designs, Metallic Red Designs, Mountain Landscapes, Silver Designs, Gloss Black Designs, Lighted Designs, Textured Finish Pieces, Freeform Designs, Table Top Pieces, Round Bar Designs, Drawing Gallery, Mosaic Gallery

This is a great example of how adding more panels and changing the layout of a sculpture can create an entirely different design. The sculpture below is basically two of my 11L sculptures, one placed above the other. The colors were changed to an amazing amber and lime green.

This piece is actually comprised of 4 pieces, each measuring 16.5" wide by 16" tall. When grouped together, as shown below, the entire sculpture measures 34" wide by 34" tall. All of the rectangular panels are precision cut stainless steel. Stainless steel round-bar is used as the framework on the back of this sculpture as well as part of the design on the front of the piece. While only about 1" of the round bar is visible, the bars actually extend the entire length of the back sides of the piece.

Alternating metallic amber and lime green panels colors were used. Both of these colors are very expensive at over $135 each for a half quart. The sparkle in the paint is actual diamond powder. They were difficult to photograph because as the light hits them from different angles the paint actually seems to change from lime green to amber, and vice versa. It is a very unique look. This piece has 7 coats of the highest quality automotive grade paint. After painting I hand polish the clear-coat to a near mirror finish. This piece is designed to hang on a wall and comes ready to hang. All you need is a hammer. I have also built this piece in gloss black and metallic red.

More 16" x 16" pieces can be added to increase the width of this design or to change the configuration of this piece. The largest that each individual piece can be built is 24" x 24". I set up a page that shows how I measure this design: How Pieces Are Measured.

When mounted as shown, this piece measures: 34" wide by 34" tall. Amber and Lime Green, all stainless steel welded construction.

For more photos of sculptures finished in lime green and amber please see sculptures: 36L, 35L, 35L Variation One, 35L Variation Two, and 37L.

The above photo shows the back side of this piece. It show the round-bar framework and welded construction.