Lawrenceville, Georgia    

Home

Custom Work

Ordering 

Contact / About

404-375-5238

Contemporary Stainless Metal Wall Art Sculpture 1L


Contact me:  RICHARD@GEORGIAMETALART.COM  
404-375-5238
Lawrenceville, Georgia

This is an original hand formed metal wall sculpture that was designed and built by me, Richard Walker.  I put an enormous amount of time and effort into these pieces to make sure that they are the finest sculptures that are available anywhere.  Each piece is completely hand cut and precision welded.  As you can see, they are three dimensional.  These sculptures stand off of the wall and are designed to allow light to pass through them.  Another thing you will notice is the finish.  Only the highest quality paints are used.  All the colors are custom mixed and can not be found anywhere else.  Hours are spent painstakingly hand polishing these pieces to a mirror finish.  The depth and clarity of these finishes are unbelievable.  When you take a close look at these pieces you can see how all the time, effort, and high quality materials make these pieces stand apart from all the rest.  

Feel free to let me know if you have any questions.

Thanks!

Richard

 Dimensions

64 inches Wide by 16 inches Tall by 1.75 inches deep
Stainless Steel Construction

100% Stainless Steel,  Precisely Hand Cut and Expertly Welded.  Extremely sturdy construction.
Sculpture Colors   The panels have a hand texture stainless steel   finish.  The stainless steel round-bar framework is unpainted.
 Paint Details

Mirror Finish -- The paint is painstakingly polished to a Mirror Finish -- The gloss is so deep that these pieces look Wet

Wall Mounting -- Indoors

This sculpture comes ready to hang.  Sculptures are designed to be mounted Indoors.  Mounting hardware is included!  All you need is a Hammer to hang these on your wall!
Original Design

These sculptures are designed, built, and painted by me, Richard Walker.  All pieces are signed and dated.  
Options   This piece can be custom built in larger sizes.  Many more colors are also   available.  Please see my Color Selection Page.  --Additional charges apply--
Purchase
64" x 16" x 1.75" 80" x 20" x 1.75" 96" x 24" x 1.75"
$675 + 25s/h $1056 + 50s/h $1520 + 60s/h

 

Galleries:  Large Pieces, Metallic Blue Designs, Metallic Red Designs, Mountain Landscapes, Silver Designs, Gloss Black Designs, Lighted Designs, Textured Finish Pieces, Freeform Designs, Table Top Pieces, Round Bar Designs, Drawing Gallery, Mosaic Gallery

New -- Master Sculpture Directory --  Links to all Galleries on this Website

To see other pieces that have the same hand textured clear-coated stainless steel finish, please see designs:

4L,  12L,  40L,  21L

This piece is also available without the clear-coat.  It would have a satin finish without the clear-coat.   

This piece is actually comprised of 4 pieces, each measuring 16" wide by 16" tall.  When placed together this sculpture is a little more than 64" wide.  All of the square panels are precision cut stainless steel.  Stainless steel round-bar is used as the framework on the back of this sculpture as well as part of the design on the front of the piece.  

The square panels have a hand textured stainless steel finish that has been clear-coated and polished.  This piece is designed to hang on a wall and comes ready to hang.  All you need is a hammer.  

 
More 16" x 16" pieces can be added to increase the width of this design or to change the configuration of this piece.  The largest that each individual piece can be built is 24" x 24".  With four 24" x 24" panels, this piece would be 96 inches wide.  Prices and sizes are listed above.  


Sculpture 1L

 

Georgia Metal Wall Art

Georgia Metal Wall Art

The floor lamp reflection shows the gloss of the polished clear-coated finish.

Fully welded construction, each of the four panels has over 20 welds that hold everything together.

 

The piece in the photos below measured over 80 inches wide by 20 inches tall.  I did not have the wall space to hang it for the photos, but the "Z" configuration that they are displayed in on the table would actually look very good if the design were slightly modified.  I could build it as a custom version.  To keep with the larger scale I used larger diameter stainless steel round-bar for the framework.  It was an extremely nice sculpture.