Metallic White Contemporary Metal Wall Art Sculpture 43L variation one, Atlanta Georgia

Lawrenceville, Georgia

404-375-5238

Modern Metal Wall Art Sculpture Metallic White 43L Variation One

This is an original hand formed metal wall sculpture that was designed and built by me, Richard Walker. I put an enormous amount of time and effort into these pieces to make sure that they are the finest sculptures that are available anywhere. Each piece is completely hand cut and precision welded. As you can see, they are three dimensional. These sculptures stand off of the wall and are designed to allow light to pass through them. Another thing you will notice is the finish. Only the highest quality paints are used. All the colors are custom mixed and can not be found anywhere else. Hours are spent painstakingly hand polishing these pieces to a mirror finish. The depth and clarity of these finishes are unbelievable. When you take a close look at these pieces you can see how all the time, effort, and high quality materials make these pieces stand apart from all the rest. Feel free to let me know if you have any questions. Thanks! Richard
Dimensions	Over 4 feet wide, 16 inches tall.
Stainless Steel Construction	100% Stainless Steel, Precisely Hand Cut and Expertly Welded. Extremely sturdy construction.
Sculpture Colors	This sculpture has a metallic pearl white finish with hand textured stainless steel sections and polished stainless steel round bar
Paint Details	Mirror Finish -- The paint is painstakingly polished to a Mirror Finish -- The gloss is so deep that these pieces look Wet Metallic -- The paint contains tiny metal particles. The colors lighten and darken depending on how much light is hitting them. Colors are Custom Mixed -- they are not available anywhere else
Wall Mounting -- Indoors	This sculpture comes ready to hang. Sculptures are designed to be mounted Indoors. Mounting hardware is included! All you need is a Hammer to hang these on your wall!
Original Design	These sculptures are designed, built, and painted by me, Richard Walker. All pieces are signed and dated.
Options	This piece can be custom built in larger sizes. Many more colors are also available. Please see my Color Selection Page. --Additional charges apply--
Purchase	This was a custom order. Please contact me to have a custom order built.

Galleries: Large Pieces, Metallic Blue Designs, Metallic Red Designs, Mountain Landscapes, Silver Designs, Gloss Black Designs, Lighted Designs, Textured Finish Pieces, Freeform Designs, Table Top Pieces, Round Bar Designs, Drawing Gallery, Mosaic Gallery

This piece is actually comprised of 3 pieces, each measuring 16.5" wide by 16" tall. When placed together, the total sculpture is a little more than four feet wide. All of the rectangular panels are precision cut stainless steel. Stainless steel round-bar is used as the framework on the back of this sculpture as well as part of the design on the front of the piece. While only about 1" of the round bar is visible, the bars actually extend the entire length of the back sides of the piece.

This is a custom piece I built that is a variation of the design, 43L. The lower stainless panels have a brushed finish rather than the hand textured finish used on many of my pieces. The stainless panels were also left un-clear-coated. The white upper panels are a very unique pearl white. I put more than 10 layers of paint on this piece and then polished the paint in 5 stages to get the finish perfect.

More 16" x 16" pieces can be added to increase the width of this design or to change the configuration of this piece. The largest that each individual piece can be built is 24" x 24". I set up a page that shows how I measure this design: How Pieces Are Measured . To see a variation of this sculpture with four panels, please see design: 54L