Lawrenceville, Georgia    

Home

Custom Work

Ordering 

Contact / About

404-375-5238

Contemporary Stainless Steel  Metal Wall Art Sculpture 22L Custom


Contact me:  RICHARD@GEORGIAMETALART.COM  
404-375-5238
Lawrenceville, Georgia

This is an original hand formed metal wall sculpture that was designed and built by me, Richard Walker.  I put an enormous amount of time and effort into these pieces to make sure that they are the finest sculptures that are available anywhere.  Each piece is completely hand cut and precision welded.  As you can see, they are three dimensional.  These sculptures stand off of the wall and are designed to allow light to pass through them.  Another thing you will notice is the finish.  Only the highest quality paints are used.  All the colors are custom mixed and can not be found anywhere else.  Hours are spent painstakingly hand polishing these pieces to a mirror finish.  The depth and clarity of these finishes are unbelievable.  When you take a close look at these pieces you can see how all the time, effort, and high quality materials make these pieces stand apart from all the rest.  

Feel free to let me know if you have any questions.

Thanks!

Richard

 Dimensions

Prices and sizes listed below
Stainless Steel Construction

100% Stainless Steel,  Precisely Hand Cut and Expertly Welded.  Extremely sturdy construction.
Sculpture Colors   Textured black, hand textured stainless steel, and textured copper with polished stainless steel round-bar accents.
 Paint Details This piece is painted with textured finishes.
Wall Mounting -- Indoors

This sculpture comes ready to hang.  Sculptures are designed to be mounted Indoors.  Mounting hardware is included!  All you need is a Hammer to hang these on your wall!
Original Design

These sculptures are designed, built, and painted by me, Richard Walker.  All pieces are signed and dated.  
Options   This piece can be custom built in larger sizes.  Many more colors are also   available.  Please see my Color Selection Page.  --Additional charges apply--
Purchase
20"  16"   
$300 + 25s/h $265 + 18s/h

 
30" 24" 
$675 + 45s/h $430 + 35s/h

This piece stands away from the wall 1.75 inches

 

Galleries:  Large Pieces, Metallic Blue Designs, Metallic Red Designs, Mountain Landscapes, Silver Designs, Gloss Black Designs, Lighted Designs, Textured Finish Pieces, Freeform Designs, Table Top Pieces, Round Bar Designs, Drawing Gallery, Mosaic Gallery

New -- Master Sculpture Directory --  Links to all Galleries on this Website

This is a variation of my design, 22L.
More colors and color combinations are also available, metallic red, gloss black, pearl white, etc.   


This sculpture is built entirely out of stainless steel.  The polished bars you see between each of the 3 panels actually run the entire length and width of the piece on the back side.  I make these pieces as rigid as possible, especially in larger sizes.  There are many welds on the back side of this piece.

The horizontal stripes on the right side of this piece are natural stainless steel that has been hand textured.  For a more natural look, I did not clear coat the stainless so it does not have a gloss.  The left side of this piece is done in a textured copper color.  At the upper right, I used a sand textured black finish.  These colors really work well together and give this piece an organic feel.

This piece really shows how changing the colors can completely change the feel of a design.  Any of my sculptures can be done in different colors.  

Please see the links above for more variations and more photos of this design.  Sizes ranging from 16x16 up to 30x30 are available.  This sculpture stands away from the wall 1.75 inches.  Prices are listed above.  Please contact me for custom orders or variations of this design.

 

Sculpture 22L Custom

 

The photos below show a 30 inch diameter version.  Notice how I added two extra bars in the center.